How to use nail drill?

Writer： admin Time：2021-06-11 20:38 Browse：℃

The nail drill can be used for nail care, repair, base treatment, gel repair/removal, and final touch-up.

1.Nail care

After soaking in water to soften the dead skin, use the special dead skin pusher for the nail drill to retract from both sides of the nail. Pay attention to control the appropriate force to push up the horny under the dead skin;

Remove the dust on the surface of the nail gully on both sides of the nail scraps in the fingertips; After subtracting the dead skin, choose a grinding head that is suitable for the area of the finger's skin to grind the hardened keratin around the nail;

Choose a grinding head suitable for the nail condition to smooth the nail surface; After the nail surface becomes smooth, throw out the gloss in the order of black, white and gray;

2.Repair

After finishing the nail shape with nail rub, use the corners of the diamond grinding head (French style) to grind the new smile line groove; put the grinding head against the crystal/gel, and adjust the thickness of the construction part to the thicker gel at the rear edge After grinding, use a steel pusher to push up the dead skin and keratin, etc., choose the most suitable grinding head for the skin and nails to clean and remove the remaining keratin under the dead skin.

Carved nail surface After patching up the repair gel mixture, use 150G nail rub to shape, and use the curvature of the grinding head to evenly polish the thickness of the nail after extension;

Turn the nail over. In order to make the thickness even with the front end of the extension nail, use a finer tip to grind the height difference;

In order not to damage the skin, use a rounded tip to remove dead skin on the edge of the finger and correct the overall shape.

After rubbing the surface with bubbles until it is smooth, use a deerskin polishing head to polish the surface of the nail to be smoother

3.Substrate treatment

Exfoliate dead skin near the finger edge, remove fine parts of dead skin and barbs, etc.

4.Gel repair/removal

Used to polish the upturned part of the rear edge and polish the nail surface.

5.Finishing

When the gel is applied to the back, it can be eliminated by a grinding head, and the hardened gel applied to the periphery of the finger edge can be removed.